HM5050XAJ security van is designed based on the mature model HM6600LFD5X passenger bus of Wuxi Huace according to the actual needs of security checking work. In the design process, the special requirements of security checking work is fully considered. Baggage security checking, video monitoring, power supply system, on-site lighting system and logistics support are integrated into the vehicle, to meet the requirements of security checking to the greatest extent.

Frame

It is the curved beam frame structure, through professional structural analysis software based on the analysis of stress simulation, validation results this frame structure can carry 5350 kg of uniformly distributed load, the design safety coefficient is 1.7, fully meet the requirements of vehicle carrying capacity, structural design adopts standards consistent with the design standards of medium-sized passenger bus, completely conform to the requirements of the automotive industry standards.

Front Suspension System

1) the front suspension is connected with the front axle assembly and the steel leaf spring through riding bolt, which can effectively absorb the vibration and impact of the vehicle. The tire is equipped with 6.50R16LT and the loading capacity of a single tire is 1060kg. Meet the requirements of medium van four-wheel positioning.

2) According to the requirements of the police mobile room to meet different road conditions, and the design standard of the front suspension of the medium-sized bus, the approach Angle is 25 degrees, which can enable the vehicle to pass the road with poor road conditions.

Rear Suspension System

1) It adopts a longitudinal leaf spring connected with the rear axle by riding bolt and a non-independent suspension system connected with the car frame through the side plate assembly of front and rear lifting lugs. According to the principle of axle load allocation in automobile design theory, the bearing mass of the rear axle is 3500kg when it is fully loaded.
2) The rear axle is a drive axle with a transmission ratio of 5.38. The differential is mainly composed of left and right axle gears, two planetary gears and gear rack. The diameter of the brake drum is 310mm.
3)、According to the design standard of the rear suspension of the medium-sized bus, the departure Angle is 15 degrees, which enables the vehicle to pass the poor road condition.

 Braking System

1）Driving brake adopts double-circuit pneumatic brake, parking brake adopts spring energy storage;
2）The pipeline adopts the new type of lock ring quick plug joint, which is convenient to disassemble and install, and has good air tightness.
3）The brake is drum type with automatic adjusting arm and ABS.

 Steering System

1）Driving brake adopts double-circuit pneumatic brake, parking brake adopts spring energy storage;
2）The pipeline adopts the new type of lock ring quick plug joint, which is convenient to disassemble and install and has good air tightness.
3）The brake is drum type with automatic adjusting arm and ABS anti-lock system.

engine

Equipped with WP2.1Q95E50 (70kW) engine from weichai power Yangzhou Diesel Engine CO., LTD

Body main part introduction

⑴ Vehicle Features
★Platform design to feel comfortable
According to the simulation analysis and ergonomic scientific design, the whole car steel mold forming, inside the car softening molding interior, to create a business high-grade car.
★Advocate safety technology first
Configuration special mature chassis, increase the car owner, passive safety, acceleration smooth, energy saving, environmental protection, comfortable, to meet different market needs.
★Electrophoresis is economical and practical
Vehicle electrophoresis technology, durable, strong bearing capacity, economical.

⑵ Vehicle Layout

⑶ View of security compartment and compartment section
⑷ Driver's Cabin
●Luxury dashboard, the passenger seat is also equipped with front and rear, upper and lower adjustable driver seat;
●Luxury interior with air conditioning cooling air duct, with front electronic road sign front inner roof, with driver fan;
●With 2 in 1 electronic clock thermometer, square endoscope, half shade curtain, curtain, etc
⑸ Working Area
●Luxury counter, marble countertop；
●Luxury non-slip floor leather, aluminum plastic plate side plate, etc；
●Table selection up and down, front and rear adjustable seats；
●Special security equipment is reasonably set。
⑹ Staff Area
●2-7 seat design, highly selective, can be driven according to B;
●Customized design above the security inspection cabin, air conditioner cabinet hanging machine and power distribution cabinet can be arranged;
●Distribution cabinets can also be arranged inside the counter
●Safety top window can be optional with air exchange function
⑺ Security Section
●Security inspection cabin can be placed a variety of types of security inspection machine;
●Security inspection engine room with lead seal processing, and installed aluminum plastic plate for decoration;
●Security engine room on both sides of the door can choose the upturn structure door, also optional shutter door.

model of car	HM5050XAJ
Chassis model/manufacturer	HM6600LFD5X Vehicle/wuxi huace automobile co., LTD
Engine model/manufacturer	WP2.1Q95E50 Weichai power yangzhou diesel engine co. LTD
Max. Output [kw/(r/min)]	70/3200
Max. Torque [Nm/(r/min)]	245/1600-2400
type of fuel	Diesel
emission standard	GB3847-2005,GB17691-2005 Euro V
basic parameter
Dimension(mm)	5995x2265x2770,2830,2910
Tread Front & Rear (mm)	1750/1525
Wheelbase(mm)	3100
Overhand Front & Rear (mm)	1040/1855
CurbWeight(kg)	4765,4885
GrossWeight(kg)	5350
Seats（With the driver）（person）	100
Tire	6.50R16LT
Leafspring Front & Rear	3/4
Approaching/departureAngle(o)	18/13